The Cisco DRMOT downrigger motor is a powerful 12-volt motor with a 7/16 inch stainless steel output shaft rotating at 110 to 115 rpm. It has the torque to retrieve heavy downrigger weights up to 20 pounds easily and quickly, through three mounting lugs in a 1-7/8 inch bolt circle with 1/4-28 fine threaded holes. A weatherproof heat-shrunk boot protects the motor and power leads, sealed with GE silicone, and the motor is Big Jon compatible with Captain Pak downriggers.

Motor Specs

The downriggers use a powerful 12 volt motor with a 7/16” stainless steel output shaft which rotates at 110-115 rpm!  The three mounting lugs are in a 1-7/8” bolt circle and are ¼-28 fine threaded holes.  It has enough torque to retrieve heavy downrigger weights up 20 lbs easily and quickly.

 For added protection, our motors include a weatherproof heat shrunk boot around the exterior of the motor/power leads and are protected with a GE silicone sealant to provide long term sustainability.

This motor is Big Jon Compatible with Captain Pak Downriggers! Some Big Jon downriggers have a switch built into the motor, and this can be moved from the Big Jon Motor to the replacement Cisco motor.