Veratron LinkUp - Pyrometer Kit
LinkUp - Pyrometer Kit
The system includes a Veratron LinkUp Gateway Module that enables the Pyrometer Sensor to be connected to and compatible with the NMEA 2000 network. Its internal galvanic isolation decouples the backbone power from the LinkUp power supply, per NMEA requirement.
Configuring a LinkUp gateway is simple using a mobile device and the companion Veratron app available from the App Store and Google Play. Each module has a built-in passive wireless antenna. The parameters of the sensor are configured to type, instance and warning threshold on the mobile device and then tapped against the LinkUp device for instant data download.
Alternatively, LinkUp devices can be configured via NMEA 2000 with the PC Configuration Tool. This method additionally allows for real-time reading of the analog signal. An LED on the device will illuminate, notifying the user that the LinkUp is being configured.
*Includes sensor and Link Up Gateway.
Features:
- NMEA 2000® certified
- Wireless configuration through companion mobile App
- Status LED
- Plug-and-Play installation and configuration
- Input Signal - LIN bus
- Nominal Voltage - 12V
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.Specifications:
- Series: LinkUp
- Gauge Type: Pyrometer
- Gauge Size: N/A
- Voltage - Input Range (Volts): 12v
- Box Set: No
- Box Dimensions: 4"H x 4"W x 16"L WT: 1.4 lbs
- UPC: 7640178729506
Owner's Manual (pdf)
Brochure (pdf)
Product Reviews
UPGRADE YOUR ANALOGUE SENSORS TO NMEA 2000® The veratron LinkUp gateways bring your analogue sensors to the NMEA 2000® network era. All your boat’s data are now digitally available to be displayed on any NMEA 2000® enabled device. Available in 5 variants to serve different scenario: - Generic resistive (level sensors, temperature sensors, pressure sensors, …) - Pyrometer - Intelligent Battery Sensor (IBS) - Combined Temp/Press sensor - J1939 All NMEA 2000® certified! PLUG-AND-PLAY INSTALLATION The standard Micro-C M12 connector perfectly interfaces with the NMEA 2000® network without the need of additional adapters. No dedicated power supply is required, the LinkUp gateway gets its power directly from the NMEA 2000® network! The embedded LED notifies you the status of the device and its configuration at any time, reducing commissioning and troubleshooting time. WIRELESS CONFIGURATION The configuration of the LinkUp devices has never been so easy. Launch the App and define your settings through the user-friendly interface, then simply hold your mobile device in proximity of the LinkUp to transfer the configuration. Thanks to the embedded passive antenna the configuration can be done powerless! Discover more on www.veratron.comThe LinkUp Configurator is your veratron companion App to wirelessly configure your LinkUp gateway device in a snap. Discover more on https://www.veratron.com For additional information contact us at info@veratron.com
Veratron LinkUp gateways
UPGRADE YOUR ANALOGUE SENSORS TO NMEA 2000® The veratron LinkUp gateways bring your analogue sensors to the NMEA 2000® network era. All your boat’s data are now digitally available to be displayed on any NMEA 2000® enabled device. Available in 5 variants to serve different scenario: - Generic resistive (level sensors, temperature sensors, pressure sensors, …) - Pyrometer - Intelligent Battery Sensor (IBS) - Combined Temp/Press sensor - J1939 All NMEA 2000® certified! PLUG-AND-PLAY INSTALLATION The standard Micro-C M12 connector perfectly interfaces with the NMEA 2000® network without the need of additional adapters. No dedicated power supply is required, the LinkUp gateway gets its power directly from the NMEA 2000® network! The embedded LED notifies you the status of the device and its configuration at any time, reducing commissioning and troubleshooting time. WIRELESS CONFIGURATION The configuration of the LinkUp devices has never been so easy. Launch the App and define your settings through the user-friendly interface, then simply hold your mobile device in proximity of the LinkUp to transfer the configuration. Thanks to the embedded passive antenna the configuration can be done powerless! Discover more on www.veratron.comThe LinkUp Configurator is your veratron companion App to wirelessly configure your LinkUp gateway device in a snap. Discover more on https://www.veratron.com For additional information contact us at info@veratron.com