Traxstech's Transducer Pole Mount, is a versatile, multi-season system that can even be used during ice fishing season in your shanty. Add a piece of 6" Traxstech track to the wall of the shanty or mount it on the floor over the ice hole. Our transducer mount works with all brands of transducers and can be used on a boat while structure fishing or trolling. Simply slide it into a piece of our mounting track and you're ready to go.
The adjustable arm on our transducer mount slides into our track system and tightens in place allowing you to index the arm into multiple different directions. Our kit comes with a 5' aluminum pole that your transducer mounts to on the end. The transducer pole has a collar system that tightens up to the pole and can be adjusted up and down to the depth you need in the water. It then sets into the arm yolk and the collar locks into place with a dovetail system that slides in and locks it into place while you are trolling or moving. We have a handle on the top of the pole that allows you to turn and adjust the transducer as needed. The handle also keeps the transducer perfectly lined up so you will know what direction the transducer is always pointing. We sell a replacement plunger assembly found on the side and in a trolling application it allows you to turn and adjust and there are holes in the collar assembly that will allow you to lock it into place if need be. Our transducer mount will work with any transducer including LiveScope. This setup allows you to use it on your boat in the spring, summer, fall and in the winter use it on your ice shanty for year-round functionality of your transducer. It also allows you to take your transducer from boat to boat, or on vacation with you as well.
Did you damage or lose the pole for your transducer mount? Traxstech sells replacement parts.
I've been waiting for this product, now I can use my ice-fishing Panoptix in my non-ice fishing boat this summer! :) I opened the box a few days ago and MAN, is this thing SOLID! I can't wait to come back and review this again once I use it on my boat this upcoming spring!
I ordered one of this early spring this year and was tired of waiting for Traxstech to fulfill the order. Somewhat understandable with the supply shortage that most have become accustomed to in the past couple years. Cancelled that order and reorder it again after a recent purchase of Livescope. Was very surprised that a tracking # was provided even though the Traxstech website still advised 5-7 weeks. After receiving the mount, immediately installed it. Couple things that would make this a perfect mount, collar indexing holes are off. Meaning that if my transducer is facing directly forward, then I want to check out for a side view, the holes in the collar is off a few degrees. Same goes with rear view, twist the pole handle and few degrees off. Does it make much difference in transducer pickup? Not sure. My 2 biggest gripes is with the black collar lock/set pin and indexed gear looking base that can rotate 360 degrees. The collar lock/set pin is very tight fitting to a point it doesn't want to seat in the collar holes well. Have to force the lock pin it and sometimes it so tight, hard to unlock the lock pin. The fit and finish of the indexed gear looking base is a bugger to pull up and rotate. There's enough play in the gear and spring that the pole is not 100% solid while trolling. I have rod holders from another company that has the same gearing and operations and "theirs" (rhyme with Crisco) has no wiggle or play. Let alone trying to pull up and trying to rotate it. My sons Brew City is a more solid and stable setup than this. Overall, very nice concept and design, just needs a lil refining to be perfect.
