Get your marine electronics at just the right angle with Traxstech's Dual Pivot Electronics Mounts. We carry a variety of heights including 8 inches, 10 inches, and 13 inches. All of our Dual Pivot Electronics Mounts come with a lift & turn base, 360-degree rotation every 18 degrees, 6 locking positions up and down in 90 degrees. With the dual pivots on the top and bottom of the mount, you have twice as many adjustments.

8 inch Dual Pivot Electronics Mount

• Part: #ECMDP-108
• Height: 8"
• Arm Length 4"
• Lift & turn base, 360-degree rotation every 18 degrees, 6 locking positions up and down in 90 degrees

10 inch Dual Pivot Electronics Mount

• Part: #ECMDP-110
• Height: 10"
• Arm Length 6"
• Lift & turn base, 360-degree rotation every 18 degrees, 6 locking positions up and down in 90 degrees

13 inch Dual Pivot Electronics Mount

• Part: #ECMDP-113
• Height: 13"
• Arm Length 9"
• Lift & turn base, 360-degree rotation every 18 degrees, 6 locking positions up and down in 90 degrees

The base plate of the mount can be used with the thumb screws in the track as shown or you can use the four corner drilled and countersunk holes and can be hard mounted.

The universal top plate is 2'' x 6'' pre-drilled and tapped to fit most u-shaped mounting brackets.

***An optional 3'' x 4'' sub plate (Part: #ECMP-4) can be purchased to mount first to your boat and then this standard plate will mount to the sub plate and allow easy removal by the four corner screws.

Comes with (2) Thumb Screws to secure it to your Traxstech Track system.