Traxstech Alumatrac Clamps for Alumacraft Boats (Black )

Description

Traxstech’s Alumatrac Clamps are exclusively designed to clamp onto the gunwale system of Alumacraft® brand boat’s. These heavy duty, machined-aluminum clamping brackets allow our track to be mounted on the top plate.

Alumatrac Clamps for Alumacraft Boats

• Part: #BACB-250
• This bracket will fit in Alumacraft's Alumatrac gunwale system.
• These clamps will only work in the Alumatrac gunwale system.
• These Alumatrac clamps allow for the installation of Traxstech's mounting track.
• Sold with 2 brackets per pack.

Please review our frequently asked questions below to see how many brackets you need.

This bracket is also used to mount to the bottom of any Traxstech rod holder (as long as the plate for sliding into our tracks is removed), making our Traxstech rod holders attachable to the Alumacraft® track system.

Frequently Asked Questions

Q. How many ACB-250 Brackets do I need per track?

A. You will need one bracket per set of mounting holes.

Please use the following information to determine how many Alumatrac Clamps you will need:

• 6 Inch Mounting Track (Part: #MT-6)
  • Requires 2 ACB-250 Brackets / 1 set of ACB-250 Brackets
• 12 Inch Mounting Track (Part: #MT-12)
  • Requires 2 ACB-250 Brackets / 1 set of ACB-250 Brackets
• 18 Inch Mounting Track (Part: #MT-18)
  • Requires 2 ACB-250 Brackets / 1 set of ACB-250 Brackets
• 24 Inch Mounting Track (Part: #MT-24)
  • Requires 2 ACB-250 Brackets / 1 set of ACB-250 Brackets. If you are installing a downrigger or 4 unit rod holder tree, then you need 4 ACB-250 Brackets / 2 sets of ACB-250 Brackets.
• 36 Inch Mounting Track (Part: #MT-36)
  • Requires 3 ACB-250 Brackets / 2 sets of ACB-250 Brackets
•  48 Inch Mounting Track (Part: #MT-48)
  • Requires 3 ACB-250 Brackets / 2 sets of ACB-250 Brackets
• 60 Inch Mounting Track (#MT-60)
  • Requires 5 ACB-250 Brackets / 3 sets of ACB-250 Brackets
• 72 Inch Mounting Track (#MT-72)
  • Requires 6 ACB-250 Brackets / 3 sets of ACB-250 Brackets

Q. What products do you make for Alumacraft boats?

A. The following items are compatible with Alumacraft boats:

• Bracket Adapter (Part #:ACB-400): This is for using other brand rod holders on your Alumacraft boat. This bracket is compatible with Scotty, Cabelas and Folbe deck mount rod holders and the S-17 model Downeast Salty rod holder. Sold as a Single Pack.
• Alumatrac Clamps for Alumacraft Boats (Part: #ACB-250): These clamps are designed to fit in the gunwale track of Alumacraft boats. This bracket fits in the Alumatrac track system and allows for installation of Traxstech's mounting system and products. Sold as 2 brackets per pack.
• Single Rod Holder on Alumacraft Bracket Adapter (Part: #RH1-ACB): Traxstech's #RH1 Rod Holder is one of our most adjustable rod holders. It is a single lift & turn rod holder that comes attached to a bracket adapter. This super duty rod holder offers maximum positioning of your fishing rod by lifting and rotating every 18 degrees/20 positions. It also offers one-handed adjust-ability by pulling the tube sideways and then moving it to next set of teeth and releasing for full engagement and strength of all 20 teeth machined in the side of this holder. There are 6 positions from 0 degrees to 90 degrees and one position past 90 degrees to get the rod tip to the water if desired. We have machined a center hub to prevent lifting when used with Dipsy Divers® on the bottom and side sections. This is an aluminum machined rod holder you will not be disappointed with its strength and flexibility.

Q. Can I mount my rod holder directly to the ACB-250 Clamps?

A. No, our Alumacraft Clamps are for mounting tracks only. If you need a bracket to mount your rod holders, you will want to look up part #ACB-400.

Product Features:

• Proudly made in the USA!
• Every aluminum part is anodized to provide the highest quality available.
• Salt spray tested and proven.
• Sold as a set of 2
• Mounting Hardware is included.
• Comes in 2 color options:
  • Clear / Silver
  • Black

We use cookies (and other similar technologies) to collect