Polyform Water Ski Series Buoy - Yellow
Water Ski Series Buoy - Yellow
Designed to compliment our S-1 Watersport Buoy, the WS-1 Slalom Buoy gives Polyform a complete watersports package offering to our customers. Made of high quality PVC and featuring a strong ropehold, this buoy is built to last for a long time.
The WS-1 meets American Waterski Association specifications for record capability tournaments. Add in the S-1's for use as boat path markers and you've got the ultimate in course markers.
Features:
- Meets official American Waterski Association specifications for record capability tournaments
- Multiple colors to mark both ski and boat courses
- High quality PVC construction
- Durable ropehold
Technical Specifications:
- Size (diameter x length) - 8" x 8.5" (20.3 x 21.6cm)
- Eye Diameter - .375" (.95cm)
- Circumference - 25.1" (63.9cm)
- Volume - 1.6 gallons (6.1L)
*Sold as an Individual
Specifications:
- Color: Yellow
- Diameter (Inches): 8"
- Box Dimensions: 3"H x 8"W x 8"L WT: 0.65 lbs
- UPC: 743952140027
Product Reviews
Using a Polyform Hand Pump #30 to inflate a Polyform Fender is simple. First, remove the plug. Second, insert the pump nozzle and inflate. Do not over inflate. It is better to under inflate. The fender wall should remain flexible. Finally, re-insert the plug. The plug face should be about flush with the surface, but not much more before it is snug. Do not over tighten. A properly inflated Polyform Fender should provide years of service if used as intended.
Polyform Fender Inflation with Polyform Handpump #30
Using a Polyform Hand Pump #30 to inflate a Polyform Fender is simple. First, remove the plug. Second, insert the pump nozzle and inflate. Do not over inflate. It is better to under inflate. The fender wall should remain flexible. Finally, re-insert the plug. The plug face should be about flush with the surface, but not much more before it is snug. Do not over tighten. A properly inflated Polyform Fender should provide years of service if used as intended.
Polyform Fender Inflation with a compressor simple.
Inflating a Polyform Fender with a compressor is easy with a tapered rubber tip nozzle on a "blow gun" attachment. First, remove the white valve screw. Next, holding the rubber tip firmly to the valve opening, carefully inflate. Do not over inflate. The fender wall should remain flexible. It is better to under inflate than to over inflate. Finally, re-insert the white valve screw. When flush with the surface, tighten only until snug, which should be no more that about 1/2 turn. Properly inflated, cared for, and used, Polyform Fenders should provide years of excellent service.