Polyform NF-4 Heavy Duty Twin Eye Fender 6.4" X 21.6" - White
NF-4 Heavy Duty Twin Eye Fender 6.4" x 21.6" - White
The NF-Series Boat Fender, one of Polyform's newest innovations, features multiple-ribbed, reinforced ropeholds, making it the strongest fender in its class.
The NF Series is an extra tough, recreational-boating fender and a good choice for use in boat locks and tidal areas where fenders are exposed to high stress situations. The NF Series is designed to last and stand up in the toughest conditions as well as being compact for easy storage in smaller craft.
Features:
- The NF Series blends the styling of the G Series (the world's most copied fender) and the multi-ribbed ropehold of the F Series (the strongest fender in its class)
- Sleek one-color styling
- Reinforced twin-eye ropeholds for flexibility and durability
- Designed for medium-duty use in both permanent protected and unprotected moorings
- Unique Polyform valve for years of service
- One (1) piece design
Technical Specifications:
- Size (diameter x length) - 6.4" x 21.6" (16.3 x 54.9cm)
- Eye Diameter - .75" (1.9cm)
- Circumference - 20.1" (51.1cm)
- Volume - 2.1 gallons (7.9L)
- Boat Size - 20' - 25' (6.1 - 7.6M)
- Weight - 3.06lbs
*Sold as an Individual
Specifications:
- Color: White
- Height: 21.6"
- Width: 6.4"
- Box Dimensions: 5"H x 7"W x 21"L WT: 2.9 lbs
- UPC: 743952004725
Product Reviews
Using a Polyform Hand Pump #30 to inflate a Polyform Fender is simple. First, remove the plug. Second, insert the pump nozzle and inflate. Do not over inflate. It is better to under inflate. The fender wall should remain flexible. Finally, re-insert the plug. The plug face should be about flush with the surface, but not much more before it is snug. Do not over tighten. A properly inflated Polyform Fender should provide years of service if used as intended.
Polyform Fender Inflation with Polyform Handpump #30
Using a Polyform Hand Pump #30 to inflate a Polyform Fender is simple. First, remove the plug. Second, insert the pump nozzle and inflate. Do not over inflate. It is better to under inflate. The fender wall should remain flexible. Finally, re-insert the plug. The plug face should be about flush with the surface, but not much more before it is snug. Do not over tighten. A properly inflated Polyform Fender should provide years of service if used as intended.
Polyform Fender Inflation with a compressor simple.
Inflating a Polyform Fender with a compressor is easy with a tapered rubber tip nozzle on a "blow gun" attachment. First, remove the white valve screw. Next, holding the rubber tip firmly to the valve opening, carefully inflate. Do not over inflate. The fender wall should remain flexible. It is better to under inflate than to over inflate. Finally, re-insert the white valve screw. When flush with the surface, tighten only until snug, which should be no more that about 1/2 turn. Properly inflated, cared for, and used, Polyform Fenders should provide years of excellent service.