Loading... Please wait...

Shop Categories

  • Polyform G-1 Twin Eye Fender 3.5" x 12.8" - Sand
  • Polyform G-1 Twin Eye Fender 3.5" x 12.8" - Sand

Polyform G-1 Twin Eye Fender 3.5" x 12.8" - Sand

$17.99 $9.99 (You save $8.00)
SKU:
94126
Brand:
Quantity

G-1 Twin Eye Fender 3.5" x 12.8" - Sand 

Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes, and reinforced rope holds for long-term durability. 

The G Series fender is designed to provide protection and stand-off for vessels between 10 to 40 feet in length.

Features:

  • Even wall thickness for maximum strength and durability
  • Molded-in ribs for strength and abrasion resistance
  • Reinforced ropeholds
  • Designed for use by trailered boats and in permanent protected moorings
  • Hangs vertically or horizontally 
  • Unique Polyform valve for years of service

Technical Specifications:

  • Size (diameter x length) - 3.5" x 12.8" (8.9 x 32.5 cm)
  • Eye Diameter - 0.375" (1 cm)
  • Circumference - 11" (27.9 cm)
  • Volume - 0.4 gallons (1.5 L)
  • Boat Size - Up to 10' (3 M)
  • Weight - .7 lb

*Sold as an Individual 

Specifications:

  • Color: Sand
  • Height: 12.8"
  • Width: 3.5"
  • Box Dimensions: 3"H x 3"W x 13"L WT: 0.7 lbs
  • UPC: 743952003629

Brochure (pdf)

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Write A Review
Polyform Fender Inflation with Polyform Handpump #30 00:34

Using a Polyform Hand Pump #30 to inflate a Polyform Fender is simple. First, remove the plug. Second, insert the pump nozzle and inflate. Do not over inflate. It is better to under inflate. The fender wall should remain flexible. Finally, re-insert the plug. The plug face should be about flush with the surface, but not much more before it is snug. Do not over tighten. A properly inflated Polyform Fender should provide years of service if used as intended.

Polyform Fender Inflation with Polyform Handpump #30

Using a Polyform Hand Pump #30 to inflate a Polyform Fender is simple. First, remove the plug. Second, insert the pump nozzle and inflate. Do not over inflate. It is better to under inflate. The fender wall should remain flexible. Finally, re-insert the plug. The plug face should be about flush with the surface, but not much more before it is snug. Do not over tighten. A properly inflated Polyform Fender should provide years of service if used as intended.

Polyform Fender Inflation with a compressor simple.

Inflating a Polyform Fender with a compressor is easy with a tapered rubber tip nozzle on a "blow gun" attachment. First, remove the white valve screw. Next, holding the rubber tip firmly to the valve opening, carefully inflate. Do not over inflate. The fender wall should remain flexible. It is better to under inflate than to over inflate. Finally, re-insert the white valve screw. When flush with the surface, tighten only until snug, which should be no more that about 1/2 turn. Properly inflated, cared for, and used, Polyform Fenders should provide years of excellent service.

Design by custom Bigcommerce designerCart Designers - Experts in ecommerce webdesign.

View Cart Go To Checkout