Loading... Please wait...

Shop Categories

  • Polyform A Series Buoy A-2 - 14.5" Diameter - White
  • Polyform A Series Buoy A-2 - 14.5" Diameter - White
  • Polyform A Series Buoy A-2 - 14.5" Diameter - White

Polyform A-2 Buoy 14.5" Diameter - White

$64.99 $57.99 (You save $7.00)
SKU:
74470
Brand:
Quantity

A-2 Buoy 14.5" Diameter - White

The A-Series is the product that launched the Polyform story.  This all-purpose product, with the signature "blue ropehold" has proven itself in the most adverse conditions. 

Marking gear used in heavy seas is no easy task.  That's why more fishermen use Polyform A-Series than all other buoys combined.  You name it, ocean, sea, or river, and the A-Series has been there. 

Put your trust in Polyform's most versatile and well-known product.

Features:

  • Even wall thickness for maximum thickness
  • Heavy duty reinforced ropeholds
  • Polyform's unique vinyl valve system
  • Dual valve inflation/deflation system 
  • Excellent choice for a rafting fender 
  • One (1) piece design

Technical Specifications:

  • Size - 14.5" x 19.5" (36.8 x 49.5cm)
  • Eye Diameter - 1.125" (2.9cm)
  • Circumference - 45.6" (115.8cm)
  • Volume - 8.2 gallons (31L)
  • Boat Size - 30 - 40 (9.1 - 12.2M)

*Sold as an Individual

Specifications:

  • Color: White
  • Diameter (Inches): 14.5"
  • Box Dimensions: 8"H x 14"W x 18"L WT: 4.2 lbs

Brochure (pdf)

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Write A Review
Polyform Fender Inflation with Polyform Handpump #30 00:34

Using a Polyform Hand Pump #30 to inflate a Polyform Fender is simple. First, remove the plug. Second, insert the pump nozzle and inflate. Do not over inflate. It is better to under inflate. The fender wall should remain flexible. Finally, re-insert the plug. The plug face should be about flush with the surface, but not much more before it is snug. Do not over tighten. A properly inflated Polyform Fender should provide years of service if used as intended.

Polyform Fender Inflation with Polyform Handpump #30

Using a Polyform Hand Pump #30 to inflate a Polyform Fender is simple. First, remove the plug. Second, insert the pump nozzle and inflate. Do not over inflate. It is better to under inflate. The fender wall should remain flexible. Finally, re-insert the plug. The plug face should be about flush with the surface, but not much more before it is snug. Do not over tighten. A properly inflated Polyform Fender should provide years of service if used as intended.

Polyform Fender Inflation with a compressor simple.

Inflating a Polyform Fender with a compressor is easy with a tapered rubber tip nozzle on a "blow gun" attachment. First, remove the white valve screw. Next, holding the rubber tip firmly to the valve opening, carefully inflate. Do not over inflate. The fender wall should remain flexible. It is better to under inflate than to over inflate. Finally, re-insert the white valve screw. When flush with the surface, tighten only until snug, which should be no more that about 1/2 turn. Properly inflated, cared for, and used, Polyform Fenders should provide years of excellent service.

Design by custom Bigcommerce designerCart Designers - Experts in ecommerce webdesign.

View Cart Go To Checkout