The Cisco MTGIM is an adjustable gimbal mount, downrigger and cross plate compatible. It adapts a pre-installed flush mount into a multi-unit rod holder, with both a straight slot and a bayonet locking slot on the bottom. For exact positioning it adjusts to any angle up to 33 degrees and rotates to any position, locking down with two 5/16 inch hex screws and a set screw so it will not slip.

The gimbal mount is one of our most popular mounts.  This mount will adapt your pre installed flush mount into a multi-unit rod holder. It comes with both a straight slot, and a bayonet locking slot on the bottom of the gimbal mount.  

For exact positioning the mount will adjust to angle up to 33° and rotate to any position to suit your needs. When you have the unit in position simply tighten down the two 5/16" hex screws on the front side.  To ensure that our gimbal mount will NEVER slip we also include a set screw on the back side of the mount (as shown in the pictures to the right).  After the two hex screws are tightened, drive the set screw into the top knurled ball of the mount and you are ready to fish!

The pole and gimbal mount are machined from solid aluminum and are machine matched from billet aluminum from first to last process.  It is designed for use with double, triple and quad plates, as well as for various downriggers.  If you are looking to attach a single rod holder to the gimbal mount, please see our Single Rod Holder Gimbal Plate. 

*** Some factory installed flush mounts come equipped with a drain hose/plug.  The bayonet locking slot will not be compatible with this style flush mount.  You will need to utilize the straight slot in this case ***