Traxtechs Gimbal Mounts

Traxstech Gimbal Mounts

Gimbal mounts are how a Traxstech rig goes on a boat that has flush-mount rod holders but no track — and no plans to drill for one. The mount's tube drops into the existing holder and locks on the gimbal pin, and its top carries the holder, downrigger base or a section of track. It's the standard route for center consoles and for adding a trolling spread to a boat that mostly fishes other ways.

Choosing one is two measurements and an angle. Tube diameter comes first: 1-1/2 or 1-3/4 inch, matched to the flush-mount holders already in the gunwale. Angle comes second: 30 degree mounts suit angled flush holders, the 90 degree straight mounts suit vertical ones. Fixed mounts (GM-100, STGM-100) hold a single accessory; the GM-180 versions put an 18 inch track on top, and the adjustable AGM versions carry 12, 18 or 24 inch tracks, turning one socket into a small track station.

What goes on top is in Traxstech Rod Holders and Traxstech Mounting Tracks. Boats with a factory gunwale track instead of flush mounts use Traxstech T-Bolt Mounts to get to the same holders.