Loading... Please wait...

Shop Categories

  • Polyform Mooring Buoy w\/SS 17" Diameter - White Blue Stripe

Polyform 17" CM Mooring Buoy w/SS Iron - White Blue Stripe

$312.99 $262.99 (You save $50.00)
SKU:
36846
Brand:

Out of Stock

17" CM Mooring Buoy with SS Iron - White Blue Stripe

The CM Series Mooring Buoy has been designed to provide the ultimate in strength, durability and boat protection, giving increased security to any mooring. 

With two versions of mooring iron - one from galvanized steel with a protective vinyl-coated eye, and the other from durable stainless steel (SS).  To provide strength and security, each version features a 1/2-inch central rod, a large eye (4-3/8 inch diameter) and a swivel (1-1/2 inch wide). 

The CM-Series is a long tested standard in mooring buoy design and is preferred by many boaters worldwide. 

Features:

  • Large eye (4-3/8") and swivel (1-1/2") provide maximum strength
  • Soft vinyl surface won't harm boat finishes
  • Polyform's unique vinyl valve seals securely
  • Even wall thickness for strength and durability
  • One (1) piece design

Technical Specifications:

  • Mooring Iron - Stainless Steel
  • Size - 17" x 22" (43.2 x 55.9cm)
  • Tube Diameter - .625" (1.6cm)
  • Circumference -  53.4" (138.7cm)
  • Volume - 11.8 gallons (44.7L)

*Sold as an Individual

Specifications:

  • Color: White
  • Diameter (Inches): 17"
  • Box Dimensions: 9"H x 11"W x 37"L WT: 13.6 lbs
  • UPC: 743952013055

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Write A Review
Polyform Fender Inflation with Polyform Handpump #30 00:34

Using a Polyform Hand Pump #30 to inflate a Polyform Fender is simple. First, remove the plug. Second, insert the pump nozzle and inflate. Do not over inflate. It is better to under inflate. The fender wall should remain flexible. Finally, re-insert the plug. The plug face should be about flush with the surface, but not much more before it is snug. Do not over tighten. A properly inflated Polyform Fender should provide years of service if used as intended.

Polyform Fender Inflation with Polyform Handpump #30

Using a Polyform Hand Pump #30 to inflate a Polyform Fender is simple. First, remove the plug. Second, insert the pump nozzle and inflate. Do not over inflate. It is better to under inflate. The fender wall should remain flexible. Finally, re-insert the plug. The plug face should be about flush with the surface, but not much more before it is snug. Do not over tighten. A properly inflated Polyform Fender should provide years of service if used as intended.

Polyform Fender Inflation with a compressor simple.

Inflating a Polyform Fender with a compressor is easy with a tapered rubber tip nozzle on a "blow gun" attachment. First, remove the white valve screw. Next, holding the rubber tip firmly to the valve opening, carefully inflate. Do not over inflate. The fender wall should remain flexible. It is better to under inflate than to over inflate. Finally, re-insert the white valve screw. When flush with the surface, tighten only until snug, which should be no more that about 1/2 turn. Properly inflated, cared for, and used, Polyform Fenders should provide years of excellent service.

Design by custom Bigcommerce designerCart Designers - Experts in ecommerce webdesign.

View Cart Go To Checkout