Loading... Please wait...

Shop Categories

  • Polyform HTM-2 Hole Through Middle Fender 8.5" x 20.5" - Graphite

Polyform HTM-2 Fender 8.5" x 20.5" - Graphite

$63.99 $55.99 (You save $8.00)
SKU:
91731
Brand:

Out of Stock

HTM-2 Fender 8.5" x 20.5" - Graphite

In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications.  Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer. 

The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length. 

Features:

  • Even wall thickness for maximum strength and durability
  • Molded-in ribs for strength and abrasion resistance
  • Reinforced tube ends
  • Designed for medium-duty use in both permanent protected and unprotected moorings
  • Unique Polyform valve for years of service
  • One (1) piece design

Technical Specifications:

  • Size (diameter x length) - 8.5" x 20.5" (21.6 x 52.1cm)
  • Tube Diameter - 0.625" (1.6cm)
  • Circumference -  26.7" (67.9cm)
  • Volume -  4.7 gallons (17.8L)
  • Boat Size - 25' - 30' (7.6 - 9.1M)
  • Weight - 4.7lb

*Sold as an Individual

Specifications:

  • Color: Graphite
  • Height: 20.5"
  • Width: 8.5"
  • Box Dimensions: 8"H x 8"W x 20"L WT: 3 lbs
  • UPC: 743952032025

Brochure (pdf)

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Write A Review
Polyform Fender Inflation with Polyform Handpump #30 00:34

Using a Polyform Hand Pump #30 to inflate a Polyform Fender is simple. First, remove the plug. Second, insert the pump nozzle and inflate. Do not over inflate. It is better to under inflate. The fender wall should remain flexible. Finally, re-insert the plug. The plug face should be about flush with the surface, but not much more before it is snug. Do not over tighten. A properly inflated Polyform Fender should provide years of service if used as intended.

Polyform Fender Inflation with Polyform Handpump #30

Using a Polyform Hand Pump #30 to inflate a Polyform Fender is simple. First, remove the plug. Second, insert the pump nozzle and inflate. Do not over inflate. It is better to under inflate. The fender wall should remain flexible. Finally, re-insert the plug. The plug face should be about flush with the surface, but not much more before it is snug. Do not over tighten. A properly inflated Polyform Fender should provide years of service if used as intended.

Polyform Fender Inflation with a compressor simple.

Inflating a Polyform Fender with a compressor is easy with a tapered rubber tip nozzle on a "blow gun" attachment. First, remove the white valve screw. Next, holding the rubber tip firmly to the valve opening, carefully inflate. Do not over inflate. The fender wall should remain flexible. It is better to under inflate than to over inflate. Finally, re-insert the white valve screw. When flush with the surface, tighten only until snug, which should be no more that about 1/2 turn. Properly inflated, cared for, and used, Polyform Fenders should provide years of excellent service.

Design by custom Bigcommerce designerCart Designers - Experts in ecommerce webdesign.

View Cart Go To Checkout